SN74ALVCH162830 - 1-Bit To 2-Bit Address Driver With 3-State Outputs

This 1-bit to 2-bit address driver is designed for 1.65-V to 3.6-V V_CC operation.

Active bus-hold circuitry holds unused or undriven inputs at a valid logic state. Use of pullup or pulldown resistors with the bus-hold circuitry is not recommended.

The outputs, which are designed to sink up to 12 mA, include equivalent 26- resistors to reduce overshoot and undershoot.

To ensure the high-impedance state during power up or power down, OE\ should be tied to V_CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

Products containing the "SN74ALVCH162830" keyword are: SN74ALVCH162830GR , SN74ALVCH162830GR , SN74ALVCH162830GRG4

• Member of the Texas Instruments Widebus™ Family
• Output Ports Have Equivalent 26- Series Resistors, So No External Resistors Are Required
• Bus Hold on Data Inputs Eliminates the Need for External Pullup/Pulldown Resistors
• Latch-Up Performance Exceeds 250 mA Per JESD 17
• ESD Protection Exceeds JESD 22
  • 2000-V Human-Body Model (A114-A)
  • 200-V Machine Model (A115-A)
  • 1000-V Charged-Device Model (C101)

Widebus is a trademark of Texas Instruments.