SN74HC563 - Octal Transparent D-Type Latches With 3-State Outputs

These 8-bit transparent D-type latches feature 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads. They are particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers.

While the latch-enable (LE) input is high, the Q\ outputs follow the complements of the data (D) inputs. When LE is taken low, the outputs are latched at the inverses of the levels set up at the D inputs.

A buffered output-enable (OE)\ input places the eight outputs in either a normal logic state (high or low logic levels) or the high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance state and increased high logic level provide the capability to drive bus lines without interface or pullup components.

To ensure the high-impedance state during power up or power down, OE\ should be tied to V_CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

OE\ does not affect internal operations of the latches. Old data can be retained or new data can be entered while the outputs are in the high-impedance state.

Products containing the "SN74HC563" keyword are: SN74HC563DW , SN74HC563DW , SN74HC563DWG4 , SN74HC563DWG4 , SN74HC563DWR , SN74HC563DWR , SN74HC563DWRG4 , SN74HC563N , SN74HC563N , SN74HC563NE4 , SN74HC563NG4 , SN74HC563NS , SN74HC563NSR

• Wide Operating Voltage Range of 2 V to 6 V
• High-Current 3-State Outputs Drive Bus Lines Directly or Up To 15 LSTTL Loads
• Low Power Consumption, 80-µA Max I_CC
• Typical t_pd = 21 ns
• ±6-mA Output Drive at 5 V
• Low Input Current of 1 µA Max
• Bus-Structured Pinout