SN74ALVCH16344 - 1-Bit To 4-Bit Address Driver With 3-State Outputs

This 1-bit to 4-bit address driver is designed for 1.65-V to 3.6-V V_CC operation.

The SN74ALVCH16344 is used in applications in which four separate memory locations must be addressed by a single address.

To ensure the high-impedance state during power up or power down, OE\ should be tied to V_CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

Active bus-hold circuitry holds unused or undriven inputs at a valid logic state. Use of pullup or pulldown resistors with the bus-hold circuitry is not recommended.

Products containing the "SN74ALVCH16344" keyword are: SN74ALVCH16344DGGR , SN74ALVCH16344DGGR , SN74ALVCH16344DGGRE4 , SN74ALVCH16344DGGRG4 , SN74ALVCH16344DL , SN74ALVCH16344DL , SN74ALVCH16344DLR

• Member of the Texas Instruments Widebus™ Family
• Bus Hold on Data Inputs Eliminates the Need for External Pullup/Pulldown Resistors
• Latch-Up Performance Exceeds 250 mA Per JESD 17
• ESD Protection Exceeds JESD 22
  • 2000-V Human-Body Model (A114-A)
  • 200-V Machine Model (A115-A)

Widebus is a trademark of Texas Instruments.