SN74LVTH240 - 3.3-V ABT Octal Buffers/Drivers With 3-State Outputs

These octal buffers and line drivers are designed specifically for low-voltage (3.3-V) V_CC operation, but with the capability to provide a TTL interface to a 5-V system environment.

These devices are organized as two 4-bit buffer/line drivers with separate output-enable (OE)\ inputs. When OE\ is low, the devices pass data from the A inputs to the Y outputs. When OE\ is high, the outputs are in the high-impedance state.

To ensure the high-impedance state during power up or power down, OE\ should be tied to V_CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

Active bus-hold circuitry holds unused or undriven inputs at a valid logic state. Use of pullup or pulldown resistors with the bus-hold circuitry is not recommended.

These devices are fully specified for hot-insertion applications using I_off and power-up 3-state. The I_off circuitry disables the outputs, preventing damaging current backflow through the devices when they are powered down. The power-up 3-state circuitry places the outputs in the high-impedance state during power up and power down, which prevents driver conflict.

Products containing the "SN74LVTH240" keyword are: SN74LVTH240DB , SN74LVTH240DB(LXH240) , SN74LVTH240DB/LXH240 , SN74LVTH240DBR , SN74LVTH240DBR , SN74LVTH240DBR LXH240 , SN74LVTH240DBR SSOP20 , SN74LVTH240DBRG4 , SN74LVTH240DW , SN74LVTH240DW , SN74LVTH240DWG4 , SN74LVTH240DWG4 , SN74LVTH240DWR , SN74LVTH240DWR , SN74LVTH240DWRE4 , SN74LVTH240DWRE4 , SN74LVTH240GQNR , SN74LVTH240IPWREP , SN74LVTH240IPWREP , SN74LVTH240NS

• Support Mixed-Mode Signal Operation (5-V Input and Output Voltages With 3.3-V V_CC)
• Support Unregulated Battery Operation Down to 2.7 V
• Typical V_OLP (Output Ground Bounce)
     <0.8 V at V_CC = 3.3 V, T_A = 25°C
• I_off and Power-Up 3-State Support Hot Insertion
• Bus Hold on Data Inputs Eliminates the Need for External Pullup/Pulldown Resistors
• Latch-Up Performance Exceeds 500 mA Per JESD 17
• ESD Protection Exceeds JESD 22
  • 2000-V Human-Body Model (A114-A)
  • 200-V Machine Model (A115-A)