UCC21530 - 4-A, 6-A, 5.7-kVrms isolated dual-channel gate driver with enable

The UCC21530 is an isolated dual-channel gate driverwith 4-A source and 6-A sink peak current. It is designed to drive IGBTs and SiC MOSFETs up to5-MHz with best-in-class propagation delay and pulse-width distortion.

The input side is isolated from the two output drivers by a5.7-kV_RMS reinforced isolation barrier, with a minimum of 100-V/nscommon-mode transient immunity (CMTI). Internal functional isolation between the two secondary-sidedrivers allows a working voltage of up to 1850 V_MAX.

This driver can be configured as two low-side drivers, two high-side drivers, or ahalf-bridge driver with programmable dead time (DT). The EN pin pulled low shuts down both outputssimultaneously and allows for normal operation when left open or pulled high. As a fail-safemeasure, primary-side logic failures force both outputs low.

The device accepts VDD supply voltages up to 25 V. A wide input VCCI range from 3 V to 18V makes the driver suitable for interfacing with both analog and digital controllers. All thesupply voltage pins have under voltage lock-out (UVLO) protection.

With all these advanced features, the UCC21530 enableshigh efficiency, high power density, and robustness in a wide variety of power applications.

• Universal: Dual Low-Side, Dual High-Side or Half-Bridge Driver
• Wide Body SOIC-14 (DWK) Package
• 3.3mm spacing between driver channels
• Switching Parameters:
  • 19-ns Typical Propagation Delay
  • 10-ns Minimum Pulse Width
  • 5-ns Maximum Delay Matching
  • 5-ns Maximum Pulse-Width Distortion
• Common-Mode Transient Immunity (CMTI) Greater than 100 V/ns
• Surge Immunity up to 12.8 kV
• Isolation Barrier Life >40 Years
• 4-A Peak Source, 6-A Peak Sink Output
• TTL and CMOS Compatible Inputs
• 3-V to 18-V Input VCCI Range
• Up to 25-V VDD Output Drive Supply
• Programmable Overlap and Dead Time
• Rejects Input Pulses and Noise Transients Shorter than 5 ns
• Operating Temperature Range –40 to +125°C
• Safety-Related Certifications (Planned):
  • 8000-V_PK Isolation per DIN V VDE V 0884-11 :2017-01
  • 5.7-kV_RMS Isolation for 1 Minute per UL 1577
  • CSA Certification per IEC 60950-1, IEC 62368-1, IEC 61010-1 and IEC 60601-1 End Equipment Standards
  • CQC Certification per GB4943.1-2011

All trademarks are the property of their respective owners.