UCC21220 - 4-A, 6-A, 3.0-kVRMS Isolated Dual-Channel Gate Driver

The UCC21220 and UCC21220A devices areisolated dual-channel gate driver with 4-A peak-source and 6-A peak-sink current. It is designed to drive power MOSFET, IGBT, and GaNtransistors with the best-in-class dynamic performance.

The devices can be configured as two low-side drivers, two high-side drivers, orhalf-bridge drivers. Two outputs can be paralleled to form a single driver which doubles the drivestrength for heavy load conditions without internal shoot-through due to the best-in-class delaymatching performance.

The input side is isolated from the two output drivers by a3.0-kV_RMS isolation barrier, with a minimum of 100-V/ns common-modetransient immunity (CMTI).

Protection features include: DIS pin shuts down both outputs simultaneously when it isset high; INA/B pin rejects input transient shorter than 5-ns; both inputs and outputs canwithstand –2-V spikes for 200-ns, all supplies have undervoltage lockout (UVLO), and active pulldown protection clamps the output below 2.1-V when unpowered or floated.

With these features, the device enables high efficiency, high power density, androbustness in a wide variety of power applications.

• Narrow Body SOIC-16 (D) Package
• Universal: Dual Low-Side, Dual High-Side or Half-Bridge Driver
• Switching Parameters:
  • 28-ns Typical Propagation Delay
  • 10-ns Minimum Pulse Width
  • 5-ns Maximum Delay Matching
  • 5.5-ns Maximum Pulse-Width Distortion
• Integrated Deglitch Filter
• Common-Mode Transient Immunity (CMTI) Greater than 100-V/ns
• 1.5-kV Channel-to-Channel Functional Isolation
• Isolation Barrier Life >40 Years
• 4-A Peak Source, 6-A Peak Sink Output
• TTL and CMOS Compatible Inputs
• 3-V to 5.5-V Input VCCI Range
• Up to 18-V VDD Output Drive Supply
  • 5-V and 8-V VDD UVLO Options
• I/Os withstand –2-V for 200 ns
• Rejects Input Pulses and Noise Transients Shorter than 5-ns
• UVLO Protection for All Power Supplies
• Active Pull Down Protection at Outputs
• Fast Disable for Power Sequencing
• Operating Temp. Range (T_A) –40°C to 125°C
• Surge Immunity up to 7800-V_PK
• Safety-Related Certifications (Planned):
  • 4242-V_PK Isolation per DIN V VDE V 0884-11:2017-01 and DIN EN 61010-1
  • 3000-V_RMS Isolation for 1 Minute per UL 1577
  • CSA Certification per IEC 60950-1, IEC 62368-1 and IEC 61010-1 End Equipment Standards
  • CQC Certification per GB4943.1-2011

All trademarks are the property of their respective owners.