UCC21541 - 1.5A/2.5A, reinforced isolation dual-channel gate driver

The UCC2154x is an isolated dual channel gate driver family designedwith up to 4-A/6-A peak source/sink current to drive power MOSFET, IGBT, and GaN transistors, andUCC21540 in DWK package also offers 3.3-mm minimum channel-to-channel spacing which facilitateshigher bus voltage.

The UCC2154xfamily can be configured as two low-side drivers, two high-side drivers, or a half-bridge driver.The input side is isolated from the two output drivers by a 5.7-kV_RMSisolation barrier, with a minimum of 100-V/ns common-mode transient immunity (CMTI).

Protection features include: resistor programmable dead time, disable feature to shutdown both outputs simultaneously, integrated de-glitch filter that rejects input transients shorterthan 5-ns, and negative voltage handling for up to –2-V spikes for 200-ns on input and output pins.All supplies have UVLO protection.

• Universal: Dual Low-Side, Dual High-Side or Half-Bridge Driver
• Wide Body Package Options
  • DW SOIC-16: Pin-2-Pin to UCC21520
  • DWK SOIC-14: 3.3mm Ch-2-Ch Spacing
• Common-Mode Transient Immunity (CMTI) Greater than 100-V/ns
• Up to 4-A Peak Source and 6-A Peak Sink Output
• 3-V to 5.5-V Input VCCI Range
• Up to 18-V VDD Output Drive Supply
  • 8-V VDD UVLO
• Switching Parameters:
  • 28-ns Typical Propagation Delay
  • 10-ns Minimum Pulse Width
  • 5-ns Maximum Delay Matching
  • 5.5-ns Maximum Pulse-Width Distortion
• Resistor-Programmable Dead Time
• TTL and CMOS Compatible Inputs
• Integrated Deglitch Filter
• I/Os withstand –2-V for 200 ns
• Isolation Barrier Life >40 Years
• Surge Immunity up to 12.8-kV_PK
• Active Pull Down Protection at Outputs
• Safety-Related Certifications (Planned):
  • 8000-V_PK Reinforced Isolation per DIN V VDE V 0884-11:2017-01 and DIN EN 61010-1
  • 5700-V_RMS Isolation for 1 Minute per UL 1577
  • CQC Certification per GB4943.1-2011

All trademarks are the property of their respective owners.