SN74ABT245B - Octal Bus Transceivers with 3-State Outputs

These octal bus transceivers are designed for asynchronous communication between data buses. The devices transmit data from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR) input. The output-enable (OE)\ input can be used to disable the device so the buses are effectively isolated.

To ensure the high-impedance state during power up or power down, OE\ should be tied to V_CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

This device is fully specified for hot-insertion applications using I_off and power-up 3-state. The I_off circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down. The power-up 3-state circuitry places the outputs in the high-impedance state during power up and power down, which prevents driver conflict.

Products containing the "SN74ABT245B" keyword are: SN74ABT245BDB , SN74ABT245BDBLE , SN74ABT245BDBR , SN74ABT245BDBR , SN74ABT245BDBR AB245B , SN74ABT245BDBRG4 , SN74ABT245BDBRG4 , SN74ABT245BDGVR , SN74ABT245BDGVR , SN74ABT245BDGVRG4 , SN74ABT245BDW , SN74ABT245BDW , SN74ABT245BDWG4 , SN74ABT245BDWG4 , SN74ABT245BDWR , SN74ABT245BDWR 0631+ , SN74ABT245BDWRG4 , SN74ABT245BGQNR , SN74ABT245BMDBREP , SN74ABT245BMDBREP

• Typical V_OLP (Output Ground Bounce)
     <1 V at V_CC = 5 V, T_A = 25°C
• I_off and Power-Up 3-State Support Hot Insertion
• High-Drive Outputs (–32-mA I_OH, 64-mA I_OL)
• Latch-Up Performance Exceeds 500 mA Per JEDEC Standard JESD 17
• ESD Protection Exceeds JESD 22
  • 2000-V Human-Body Model (A114-A)
  • 200-V Machine Model (A115-A)