ADC081C027 - I2C-Compatible, 8-Bit Analog-to-Digital Converter with Alert Function

The ADC081C021 is a low-power, monolithic, 8-bit, analog-to-digital converter (ADC) that operates from a +2.7 to 5.5V supply. The converter is based on a successive approximation register architecture with an internal track-and-hold circuit that can handle input frequencies up to 11MHz. The ADC081C021 operates from a single supply which also serves as the reference. The device features an I²C-compatible serial interface that operates in all three speed modes, including high speed mode (3.4MHz).

The ADC's Alert feature provides an interrupt that is activated when the analog input violates a programmable upper or lower limit value. The device features an automatic conversion mode, which frees up the controller and I²C interface. In this mode, the ADC continuously monitors the analog input for an "out-of-range" condition and provides an interrupt if the measured voltage goes out-of-range.

The ADC081C021 comes in two packages: a small SOT-6 package with an alert output, and an VSSOP-8 package with an alert output and two address selection inputs. The ADC081C027 comes in a small SOT-6 package with an address selection input. The ADC081C027 provides three pin-selectable addresses while the VSSOP-8 version of the ADC081C021 provides nine pin-selectable addresses. Pin-compatible alternatives to the SOT-6 options are available with additional address options.

Normal power consumption using a +3V or +5V supply is 0.26mW or 0.78mW, respectively. The automatic power-down feature reduces the power consumption to less than 1µW while not converting. Operation over the industrial temperature range of −40°C to +105°C is ensured. Their low power consumption and small packages make this family of ADCs an excellent choice for use in battery operated equipment.

The ADC081C021 and ADC081C027 are part of a family of pin-compatible ADCs that also provide 10- and 12-bit resolution. For 10-bit ADCs see the ADC101C021 and ADC101C027. For 12-bit ADCs see the ADC121C021 and ADC121C027.

Products containing the "ADC081C027" keyword are: ADC081C027CIMK , ADC081C027CIMK/ , ADC081C027CIMK/NOP , ADC081C027CIMK/NOPB , ADC081C027CIMK/NOPB , ADC081C027CIMKNOPB , ADC081C027CIMKX , ADC081C027CIMKX/NOPB , ADC081C027CIMKX/NOPB , ADC081C027CIMKXNOPB

• I²C-Compatible 2-Wire Interface Which Supports Standard (100kHz), Fast (400kHz), and High Speed (3.4MHz) Modes
• Extended Power Supply Range (+2.7V to +5.5V)
• Up to Nine Pin-Selectable Chip Addresses (VSSOP-8 only)
• Out-of-Range Alert Function
• Automatic Power-Down Mode While Not Converting
• Very Small SOT-6 and VSSOP-8 Packages
• ±8kV HBM ESD Protection (SDA, SCL)

Key Specifications

• Resolution: 8 bits; No Missing Codes
• Conversion Time 1 µs (Typ)
• INL & DNL: ±0.2 LSB (Max)
• Throughput Rate: 188.9 ksps (Max)
• Power Consumption (at 22ksps):
  • 3V Supply: 0.26 mW (Typ)
  • 5V Supply: 0.78 mW (Typ)

All trademarks are the property of their respective owners. I2C is a trademark of Texas Instruments.