SN74121 - Monostable multivibrator with Schmitt-trigger inputs

These multivibrators feature dual negative-transition-triggered inputs and a single positive-transition-triggered input which can be used as an inhibit input. Complementary output pulses are provided.

Pulse triggering occurs at a particular voltage level and is not directly related to the transition time of the input pulse. Schmitt-trigger input circuitry (TTL hysteresis) for the B input allow jitter-free triggering from inputs with transition rates as slow as 1 volt/second, providing the circuit with an excellent noise immunity of typically 1.2 volts. A high immunity to V_CC noise of typically 1.5 volts is also provided by internal latching circuitry.

Once fired, the outputs are independent of further transitions of the inputs and are a function only of the timing components. Input pulses may be of any duration relative to the output puls. Output pulse length may be varied from 40 nanoseconds to 28 seconds by choosing appropriate timing components. With no external timing components (i.e., R_int connected to V_CC, C_ext and R_ext/C_ext open), an output pulse of typically 30 or 35 nanoseconds is achieved which may be used as a d-c triggered reset signal. Output rise and fall times are TTL compatible and independent of pulse length.

Pulse width stability is achieved through internal compensation and is virtually independent of V_CC and temperature. In most application, pulse stability will only be limited by the accuracy of external timing components.

Jitter-free operation is maintained over the full temperature and V_CC ranges for more than six decades of timing capacitance (10 pF to 10 µF) and more than one decade of timing resistance (2 k may be used. Also, the range of jitter-free output pulse widths is extended if V_CC is held to 5 volts and free-air temperature is 25°C. Duty cycles as high as 90% are achieved when using maximum recommended R_T. Higher duty cycles are available if a certain amount of pulse-width jitter is allowed.

Products containing the "SN74121" keyword are: SN74121D , SN74121D , SN74121DE4 , SN74121DE4 , SN74121DR , SN74121DRG4 , SN74121J , SN74121N , SN74121N , SN74121N-SN74121 , SN74121NE4 , SN74121NS , SN74121NSR , SN74121NSRE4 , SN74121NSRG4

• Programmable Output Pulse Width With R_int...35 ns Typ With R_ext/C_ext ...40 ns to 28 Seconds
• Internal Compensation for Virtual Temperature Independence
• Jitter-Free Operation up to 90% Duty Cycle
• Inhibit Capability