The HC173 and HCT173 high speed three-state quad Dtype flip-flops are fabricated with silicon gate CMOS technology. They possess the low power consumption of standard CMOS Integrated circuits, and can operate at speeds comparable to the equivalent low power Schottky devices. The buffered outputs can drive 15 LSTTL loads. The large output drive capability and three-state feature make these parts ideally suited for interfacing with bus lines in bus oriented systems.
The four D-type flip-flops operate synchronously from a common clock. The outputs are in the three-state mode when either of the two output disable pins are at the logic "1" level. The input ENABLES allow the flip-flops to remain in their present states without having to disrupt the clock If either of the 2 input ENABLES are taken to a logic "1" level, the Q outputs are fed back to the inputs, forcing the flip-flops to remain in the same state. Reset is enabled by taking the MASTER RESET (MR) input to a logic "1" level. The data outputs change state on the positive going edge of the clock.
The HCT173 logic family is functionally, as well as pin compatible with the standard LS logic family.
Products containing the "CD54HCT173" keyword are: CD54HCT173F , CD54HCT173F. , CD54HCT173F3 , CD54HCT173F3A , CD54HCT173F3A 5962-887Data sheet acquired from Harris Semiconductor
Status | ACTIVE |
SubFamily | D-type flip-flop |
Technology Family | HCT |
VCC | 5.5 |
Bits | 4 |
Voltage | 5 |
F @ nom voltage | 25 |
ICC @ nom voltage | 0.08 |
tpd @ Nom Voltage | 50 |
3-state output | Yes |
Rating | Military |
Operating temperature range | -55 to 125 |
Package Group | CDIP|16 |
Package size: mm2:W x L (PKG) | See datasheet (CDIP) |
Approx. price |