74ACT16827 - 20-Bit Buffers/Drivers With 3-State Outputs

The 'ACT16827 are noninverting 20-bit buffers composed of two 10-bit sections with separate output-enable signals. For either 10-bit buffer section, the two output-enable (1 and 1 or 2 and 2) inputs must both be low for the corresponding Y outputs to be active. If either output-enable input is high, the outputs of that 10-bit buffer section are in the high-impedance state.

The 74ACT16827 is packaged in TI's shrink small-outline package, which provides twice the I/O pin count and functionality of standard small-outline packages in the same printed-circuit-board area.

The 54ACT16827 is characterized for operation over the full military temperature range of -55°C to 125°C. The 74ACT16827 is characterized for operation from -40°C to 85°C.

 

 

Products containing the "74ACT16827" keyword are: 74ACT16827DL , 74ACT16827DL , 74ACT16827DLG4 , 74ACT16827DLR , 74ACT16827DLR , 74ACT16827DLRG4

• Members of the Texas Instruments Widebus^TM Family
• Inputs Are TTL-Voltage Compatible
• 3-State Outputs Drive Bus Lines Directly
• Flow-Through Architecture Optimizes PCB Layout
• Distributed V_CC and GND Pin Configuration Minimizes High-Speed Switching Noise
• EPIC^TM (Enhanced-Performance Implanted CMOS) 1-m Process
• 500-mA Typical Latch-Up Immunity at 125°C
• Package Options Include Plastic 300-mil Shrink Small-Outline (DL) Packages Using 25-mil Center-to-Center Pin Spacings and 380-mil Fine-Pitch Ceramic Flat (WD) Packages Using 25-mil Center-to-Center Pin Spacings

 

EPIC and Widebus are trademarks of Texas Instruments Incorporated.