DLPC410 - Digital Controller for Discovery 4100 chipset

The DLPC410 is a digital controller that supports five DMD options: DLP650LNIR, DLP7000, DLP7000UV, DLP9500, and DLP9500UV. It is the convenient,high-speed data and control interface between the application electronics and the DMD. The DLPC410provides DMD Mirror Clocking Pulses (Resets) and timing information to the DLPA200 DMD MicromirrorDriver. The device is configured with firmware stored in the DLPR410 PROM.

This family of chipsets enables pixel data rates up to 48 Gigabits per second (Gbps) withthe option for single, dual, quad, and global Resets. In addition, random row addressing and LOAD4capabilities are offered. Often the family of chips is used when designing UV and NIR systems suchas direct imaging lithography, 3D printing, and laser marking systems that need fast throughput andpixel accurate control.

In DLP-based electronics solutions, image data is 100% digital from the DLPC410 inputport to the projected image. The image stays in digital form and is never converted into an analogsignal. The DLPC410 processes the digital input image and converts the data into a format needed bythe image on the DMD. The DMD then steers the light using binary pulse-width modulation (PWM) foreach pixel mirror.

• Operates the Following DLP^® Chips:
  • DLP650LNIR, DLP7000, DLP7000UV, DLP9500, and DLP9500UV DMDs
  • DLPA200 DMD Micromirror Driver
  • DLPR410 Configuration PROM
• Enables High Speed DMD Pattern Rates
  • 1-Bit Binary Pattern Rates up to 32 kHz
  • 8-Bit Monochrome Pattern Rates up to 4 kHz
• 400 MHz Input Data Clock Rates
• 64-Bit 2xLVDS Data Bus Interfaces In/Out
• Supports Random Row and LOAD4 DMD Addressing
• Compatible With a Variety of User Defined Processors or FPGAs

All trademarks are the property of their respective owners.