The OPA356-Q1 is a high-speed voltage-feedback CMOS operational amplifier designed forvideo and other applications requiring wide bandwidth. The OPA356-Q1 is unity-gain stable and candrive large output currents. Differential gain is 0.02% and differential phase is 0.05°. Quiescentcurrent is only 8.3 mA.
The OPA356-Q1 is optimized for operation on single or dual supplies as low as 2.5 V(±1.25 V) and up to 5.5 V (±2.75 V). The common-mode input range for the OPA356-Q1 extends 100 mVbelow ground and up to 1.5 V from V+. The output swing is within 100 mV of the rails,supporting wide dynamic range.
The OPA356-Q1 is available in the SOT23-5 package and is specified over the –40°C to125°C range.
All trademarks are the property of their respective owners.
| Status | ACTIVE |
| Architecture | CMOS^Voltage FB |
| Number of channels | 1 |
| Total Supply Voltage | 5.5 |
| BW @ Acl | 450 |
| Acl, min spec gain | 1 |
| Slew Rate | 300 |
| Vn at flatband | 5.8 |
| Vn at 1 kHz | 5.8 |
| Iq per channel | 8.3 |
| Vos (offset voltage @ 25 C) | 9 |
| Rail-to-rail | In to V-^Out |
| Features | Shutdown |
| Rating | Automotive |
| Operating temperature range | -40 to 125 |
| Package Group | SOT-23|5 |
| Approx. price | 0.83 | 1ku |
| Package size: mm2:W x L (PKG) | [pf]5SOT-23[/pf]: 8 mm2: 2.8 x 2.9 (SOT-23|5) |
| CMRR | 80 |
| Input bias current | 50000 |
| Offset drift | 7 |
| GBW | 450 |
| Output current | 100 |
| 2nd harmonic | 81 |
| 3rd harmonic | 93 |
| @ MHz | 1 |
| Radiation, TID | |
| Radiation, SEL |