The design of the OPAx354-Q1 family of high-speed, voltage-feedback CMOS operationalamplifiers is for video and other applications requiring wide bandwidth. These devices areunity-gain stable and can drive large output currents. Differential gain is 0.02% and differentialphase is 0.09°. Quiescent current is only 4.9 mA per channel.
The OPAx354-Q1 family of operational amplifiers (op-amps) are optimized for operation onsingle or dual supplies as low as 2.5 V (±1.25 V) and up to 5.5 V (±2.75 V). Common-mode inputrange extends beyond the supplies. The output swing is within 100 mV of the rails, supporting widedynamic range.
The single-supply version (OPA354A-Q1) is available in the tiny SOT–23-5 (DBV) package.The dual-supply version (OPA2354A-Q1) is available in the miniature VSSOP-8 (DGK) package andfeatures completely independent circuitry for lowest crosstalk and freedom from interaction. Thequad-supply version (OPA4354-Q1) is available in the TSSOP-14 (PW) package. The devicespecifications are for operation over the automotive temperature range of –40°C to +125°C.
All trademarks are the property of their respective owners.
| Status | ACTIVE |
| Architecture | CMOS^Voltage FB |
| Number of channels | 1 |
| Total Supply Voltage | 5.5 |
| BW @ Acl | 250 |
| Acl, min spec gain | 1 |
| Slew Rate | 150 |
| Vn at flatband | 6.5 |
| Vn at 1 kHz | 6.5 |
| Iq per channel | 4.9 |
| Vos (offset voltage @ 25 C) | 8 |
| Rail-to-rail | In^Out |
| Features | N/A |
| Rating | Automotive |
| Operating temperature range | -40 to 125 |
| Package Group | SOT-23|5 |
| Approx. price | 0.83 | 1ku |
| Package size: mm2:W x L (PKG) | [pf]5SOT-23[/pf]: 8 mm2: 2.8 x 2.9 (SOT-23|5) |
| CMRR | 80 |
| Input bias current | 50000 |
| Offset drift | 4 |
| GBW | 250 |
| Output current | 100 |
| 2nd harmonic | 75 |
| 3rd harmonic | 83 |
| @ MHz | 1 |
| Radiation, TID | |
| Radiation, SEL |