The OPA2890 represents a major step forward in unity-gain stable, voltage-feedback op amps. A new internal architecture provides slew rate and full-power bandwidth previously found only in wideband, current-feedback op amps. These capabilities give exceptional single-supply operation. Using a single +5V supply, the OPA2890 can deliver a 0.9V to 4.1V output swing with over 30mA drive current and 210MHz bandwidth. This combination of features makes the OPA2890 an ideal RGB line driver or single-supply analog-to-digital converter (ADC) input driver.
The low 1.1mA/ch supply current of the OPA2890 is precisely trimmed at +25°C. This trim, along with low temperature drift, ensures lower maximum supply current than competing products. System power may be reduced further using the optional disable control pin (MSOP-10 package only). Leaving this disable pin open, or holding it high, operates the OPA2890 normally. If pulled low, the OPA2890 supply current drops to less than 30µA/ch while the output goes into a high-impedance state.
Products containing the "OPA2890" keyword are: OPA2890ID , OPA2890ID , OPA2890IDG4 , OPA2890IDGSR , OPA2890IDGSRG4 , OPA2890IDGST , OPA2890IDGST , OPA2890IDGSTG4 , OPA2890IDR , OPA2890IDR , OPA2890IDRG4All other trademarks are the property of their respective owners
Status | ACTIVE |
Architecture | Bipolar^Voltage FB |
Number of channels | 2 |
Total Supply Voltage | 12 |
BW @ Acl | 250 |
Acl, min spec gain | 1 |
Slew Rate | 400 |
Vn at flatband | 8 |
Vn at 1 kHz | 8 |
Iq per channel | 1.1 |
Vos (offset voltage @ 25 C) | 5 |
Rail-to-rail | No |
Features | Shutdown |
Rating | Catalog |
Operating temperature range | -40 to 85 |
Package Group | SOIC|8 |
Approx. price | 1.32 | 1ku |
Package size: mm2:W x L (PKG) | [pf]8SOIC[/pf]: 29 mm2: 6 x 4.9 (SOIC|8) |
CMRR | 68 |
Input bias current | 1600000 |
Offset drift | 35 |
GBW | 250 |
Output current | 40 |
2nd harmonic | 84 |
3rd harmonic | 89 |
@ MHz | 1 |
Radiation, TID | |
Radiation, SEL |