SN74AVC32T245 - 32-Bit Dual-Supply Bus Transceiver with Configurable Voltage Translation and 3-State Outputs

This 32-bit noninverting bus transceiver uses two separate, configurable power-supply rails. The SN74AVC32T245 device is optimized to operate with V_CCA/V_CCB set from 1.4 V to 3.6 V. It is operational with V_CCA/V_CCB as low as 1.2 V. The A port is designed to track V_CCA. V_CCA and accepts any supply voltage from 1.2 V to 3.6 V. The B port is designed to track V_CCB. V_CCB and accepts any supply voltage from 1.2 V to 3.6 V. This allows for universal low-voltage bidirectional translation between any of the 1.2 V, 1.5V, 1.8 V, 2.5 V, and 3.3 V voltage nodes.

The SN74AVC32T245 is designed for asynchronous communication between data buses. The device transmits data from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR) input. The output-enable (OE) input can disable the outputs so the buses are effectively isolated.

The SN74AVC32T245 is designed so that the control pins (1DIR, 2DIR, 3DIR, 4DIR, 1OE, 2OE, 3OE, and 4OE) are supplied by V_CCA.

This device is fully specified for partial-power-down applications using I_off. The I_off circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.

The V_CC isolation feature ensures that if either V_CC input is at GND, then both ports are in the high-impedance state.

To ensure the high-impedance state during power up or power down, OE should be tied to V_CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

Products containing the "SN74AVC32T245" keyword are: SN74AVC32T245GKER , SN74AVC32T245GKER , SN74AVC32T245ZKER , SN74AVC32T245ZKER , SN74AVC32T245ZKER (WY245 , SN74AVC32T245ZRLR , SN74AVC32T245ZRLR

• Member of the Texas Instruments Widebus+™
  Family
• Control Inputs V_IH/V_IL Levels Referenced to V_CCA
  Voltage
• V_CC Isolation Feature – If Either V_CC Input is at
  GND, Both Ports are in the High-Impedance State
• Overvoltage-Tolerant Inputs/Outputs Allow Mixed-
  Voltage-Mode Data Communications
• Fully Configurable Dual-Rail Design Allows Each
  Port to Operate Over Full 1.2 V to 3.6 V Power-
  Supply Range
• I_off Supports Partial-Power-Down Mode Operation
• 4.6 V Tolerant I/Os
• Max Data Rates
  • 380 Mbps (1.8 V to 3.3 V Level-Shifting)
  • 200 Mbps (< 1.8 V to 3.3 V Level-Shifting)
  • 200 Mbps (Translate to 2.5 V or 1.8 V)
  • 150 Mbps (Translate to 1.5 V)
  • 100 Mbps (Translate to 1.2 V)
• Latch-Up Performance Exceeds 100 mA Per
  JESD 78, Class II
• ESD Protection Exceeds JESD 22
  • 4000 V Human-Body Model (A114-A)
  • 200 V Machine Model (A115-A)
  • 1000 V Charged-Device Model (C101)

Applications

• Personal Electronics
• Industrial
• Enterprise
• Telecom

All trademarks are the property of their respective owners.