TLV5631 - 2.7V to 5.5V 10-Bit 8-Channel Serial DAC W/Int Ref

The TLV5630, TLV5631, and TLV5632 are pin-compatible,eight-channel, 12-/10-/8-bit voltage output DACs each with a flexible serial interface. The serial interface allows glueless interface to TMS320 and SPI, QSPI, and Microwire serial ports. It is programmed with a 16-bit serial string containing 4 control and 12 data bits.

Additional features are a power-down mode, an LDAC input for simultaneous update of all eight DAC outputs, and a data output which can be used to cascade multiple devices, and an internal programmable band-gap reference.

The resistor string output voltage is buffered by a rail-to-rail output amplifier with a programmable settling time to allow the designer to optimize speed vs power dissipation. The buffered, high-impedance reference input can be connected to the supply voltage.

Implemented with a CMOS process, the DACs are designed for single-supply operation from 2.7 V to 5.5 V, and can operate on two separate analog and digital power supplies. The devices are available in 20-pin SOIC and TSSOP packages.

• Eight Voltage Output DACs inOne Package
  • TLV5630 . . .12-Bit
  • TLV5631 . . .10-Bit
  • TLV5632 . . .8-Bit
  • 1 µs in Fast Mode
  • 3 µs in Slow Mode
• Programmable Settling Time vs Power
  Consumption
  • 1 µs in Fast Mode
  • 3 µs in Slow Mode
  • 18 mW in Slow Mode at 3 V
  • 48 mW in Fast Mode at 3 V
• Compatible With TMS320 and SPI Serial Ports
• Monotonic Over Temperature
• Low Power Consumption:
  • 18 mW in Slow Mode at 3 V
  • 48 mW in Fast Mode at 3 V
• Power-Down Mode
• Internal Reference
• Data Output for Daisy-Chaining
• APPLICATIONS
  • Digital Servo Control Loops
  • Digital Offset and Gain Adjustment
  • Industrial Process Control
  • Machine and Motion Control Devices
  • Mass Storage Devices