DAC8501 - Multiplying, Low-Power, Rail-to-Rail Output, 16-Bit Serial Input Digital-to-Analog Converter

The DAC8501 is a low-power, single, 16-bit buffered voltage output Digital-to-Analog Converter (DAC) optimized for multiplying operation. Its on-chip precision output amplifier allows rail-to-rail output swing to be achieved. The DAC8501 uses a versatile 3-wire serial interface that operates at clock rates up to 30MHz and is compatible with standard SPI™, QSPI™, Microwire™, and Digital Signal Processor (DSP) interfaces.

The DAC8501 requires an external reference voltage to set the output range of the DAC. The DAC8501 incorporates a power-on reset circuit that ensures that the DAC output powers up at 0V and remains there until a valid write takes place to the device. The DAC8501 contains a power-down feature, accessed over the serial interface, that reduces the current consumption of the device to 200nA at 5V.

The low-power consumption of this part in normal operation makes it ideally suited to portable battery-operated equipment. The power consumption is 1.2mW at 5V reducing to 1µW in power-down mode.

The DAC8501 is available in an MSOP-8 package.

Products containing the "DAC8501" keyword are: DAC8501E , DAC8501E/250 , DAC8501E/250 , DAC8501E/250G4 , DAC8501E/2K5 , DAC8501E/2K5G4 , DAC8501E250 , DAC8501E2K5

• microPOWER OPERATION: 250 µA at 5V
• MULTIPLYING-MODE BANDWIDTH: 350kHz
• POWER-ON RESET TO ZERO
• POWER SUPPLY: +2.7V to +5.5V
• ENSURED MONOTONIC BY DESIGN
• SETTLING TIME: 10 µs to ±0.003% FSR
• LOW-POWER SERIAL INTERFACE WITH SCHMITT-TRIGGERED INPUTS
• ON-CHIP OUTPUT BUFFER AMPLIFIER, RAIL-TO-RAIL OPERATION
• SYNC\ INTERRUPT FACILITY
• MSOP-8 PACKAGE
• APPLICATIONS
  • PROCESS CONTROL
  • DATA ACQUISITION SYSTEMS
  • CLOSED-LOOP SERVO-CONTROL
  • PC PERIPHERALS
  • PORTABLE INSTRUMENTATION
  • PROGRAMMABLE ATTENUATION

SPI and QSPI are registered trademarks of Motorola.
Microwire is a registered trademark of National Semiconductor.