ADS54J40 - Dual-Channel, 14-Bit, 1.0-GSPS Analog-to-Digital Converter (ADC)

The ADS54J40 is a low-power, wide-bandwidth, 14-bit, 1.0-GSPS, dual-channel, analog-to-digital converter (ADC). Designed for high signal-to-noise ratio (SNR), the device delivers a noise floor of –158 dBFS/Hz for applications aiming for highest dynamic range over a wide instantaneous bandwidth. The device supports the JESD204B serial interface with data rates up to 10.0 Gbps, supporting two or four lanes per ADC. The buffered analog input provides uniform input impedance across a wide frequency range and minimizes sample-and-hold glitch energy. Each ADC channel optionally can be connected to a wideband digital down-converter (DDC) block. The ADS54J40 provides excellent spurious-free dynamic range (SFDR) over a large input frequency range with very low power consumption.

The JESD204B interface reduces the number of interface lines, allowing high system integration density. An internal phase-locked loop (PLL) multiplies the ADC sampling clock to derive the bit clock that is used to serialize the 14-bit data from each channel.

• 14-Bit Resolution, Dual-Chanel, 1-GSPS ADC
• Noise Floor: –158 dBFS/Hz
• Spectral Performance (f_IN = 170 MHz at –1 dBFS):
  • SNR: 69.0 dBFS
  • NSD: –155.9 dBFS/Hz
  • SFDR: 86 dBc
  • SFDR: 89 dBc (Except HD2, HD3, and Interleaving Tones)
• Spectral Performance (f_IN = 350 MHz at –1 dBFS):
  • SNR: 66.3 dBFS
  • NSD: –153.3 dBFS/Hz
  • SFDR: 75 dBc
  • SFDR: 85 dBc (Except HD2, HD3, and Interleaving Tones)
• Channel Isolation: 100 dBc at f_IN = 170 MHz
• Input Full-Scale: 1.9 V_PP
• Input Bandwidth (3 dB): 1.2 GHz
• On-Chip Dither
• Integrated Wideband DDC Block
• JESD204B Interface with Subclass 1 Support:
  • 2 Lanes per ADC at 10.0 Gbps
  • 4 Lanes per ADC at 5.0 Gbps
  • Support for Multi-Chip Synchronization
• Power Dissipation: 1.35 W/ch at 1 GSPS
• VQFNP-72 Package (10 mm × 10 mm)