ADC101C021 - I2C-Compatible, 10-Bit Analog-to-Digital Converter (ADC) with Alert Pin

The ADC101C021 is a low-power, monolithic, 10-bit, analog-to-digital converter (ADC) that operates from a +2.7 to 5.5V supply. The converter is based on a successive approximation register architecture with an internal track-and-hold circuit that can handle input frequencies up to 11MHz. The ADC101C021 operates from a single supply which also serves as the reference. The device features an I²C-compatible serial interface that operates in all three speed modes, including high speed mode (3.4MHz).

The ADC's Alert feature provides an interrupt that is activated when the analog input violates a programmable upper or lower limit value. The device features an automatic conversion mode, which frees up the controller and I²C interface. In this mode, the ADC continuously monitors the analog input for an "out-of-range" condition and provides an interrupt if the measured voltage goes out-of-range.

The ADC101C021 comes in two packages: a small SOT-6 package with an alert output, and an VSSOP-8 package with an alert output and two address selection inputs. The ADC101C027 comes in a small SOT-6 package with an address selection input. The ADC101C027 provides three pin-selectable addresses while the VSSOP-8 version of the ADC101C021 provides nine pin-selectable addresses. Pin-compatible alternatives to the SOT-6 options are available with additional address options.

Normal power consumption using a +3V or +5V supply is 0.26mW or 0.78mW, respectively. The automatic power-down feature reduces the power consumption to less than 1µW while not converting. Operation over the industrial temperature range of −40°C to +105°C is guaranteed. Their low power consumption and small packages make this family of ADCs an excellent choice for use in battery operated equipment.

The ADC101C021 and ADC101C027 are part of a family of pin-compatible ADCs that also provide 12 and 8 bit resolution. For 12-bit ADCs see the ADC121C021 and ADC121C027. For 8-bit ADCs see the ADC081C021 and ADC081C027.

Products containing the "ADC101C021" keyword are: ADC101C021CIMK , ADC101C021CIMK/NOPB , ADC101C021CIMKNOPB , ADC101C021CIMKX , ADC101C021CIMKX/NO , ADC101C021CIMKX/NOPB , ADC101C021CIMKX/NOPB , ADC101C021CIMKXNOPB , ADC101C021CIMM , ADC101C021CIMM/NOPB , ADC101C021CIMM/NOPB , ADC101C021CIMMX , ADC101C021CIMMX/NOPB , ADC101C021CIMMX/NOPB

• I²C-Compatible 2-wire Interface which supports standard (100kHz), fast (400kHz), and high speed (3.4MHz) modes
• Extended power supply range (+2.7V to +5.5V)
• Up to nine pin-selectable chip addresses (VSSOP-8 only)
• Out-of-range Alert Function
• Automatic Power-down mode while not converting
• Very small SOT-6 and VSSOP-8 packages
• ±8kV HBM ESD protection (SDA, SCL)

Key Specifications

• Resolution 10 bits; no missing codes
• Conversion Time 1µs (typ)
• INL & DNL ±0.5 LSB (max)
• Throughput Rate 188.9 kSPS (max)
• Power Consumption (at 22kSPS)
  • 3V Supply 0.26 mW (typ)
  • 5V Supply 0.78 mW (typ)