ADS7952-Q1 - Automotive 12-Bit, 1MSPS, 12-Channel Single-Ended Micropower, Serial Interface ADC

The ADS79xx-Q1 device family consists of multichannel 8-bit, 10-bit and 12-bit analog-to-digital converters (ADCs). The devices include a capacitor-based successive approximation register (SAR) ADC with inherent sample and hold. Multiple features and great performance makes the ADS79xx-Q1 device useful for wide variety of applications where multiple channels should be monitored.

The ADS79xx-Q1 device works on a wide analog-supply range from 2.7 V to 5.25 V. These devices are suitable for battery-powered and isolated power-supply applications because of very-low power consumption.

The 4- and 8-channel devices are available in 30-pin TSSOP package. The 12- and 16-channel devices are available in 38-pin TSSOP package.

SPI is a trademark of Motorola Inc.
All other trademarks are the property of their respective owners.

• Qualified for Automotive Applications
• AEC-Q100 Tested with the Following Results:
  • Device Temperature Grade 1: –40°C to 125°C
    Ambient Operating Temperature Range
  • Device HBM ESD Classification Level H2
  • Device CDM ESD Classification Level C4B
• Product Family:
  • 8-, 10-, and 12-Bit Resolution
  • 4-, 8-, 12-Channel Devices Share 16 Channel Footprint
• 1-MHz Sample-Rate Serial Devices
• Analog Supply Range: 2.7 V to 5.25 V
• I/O Supply Range: 1.7 V to 5.25 V
• Two SW-Selectable Unipolar, Input Ranges:
  • (0 V to 2.5 V) or (0 V to 5 V)
• Auto and Manual Modes for Channel Selection
• Two Programmable Alarm Levels per Channel
• Four Individually Configurable GPIOs
• Typical Power Dissipation: 14.5 mW (V_(+VA) = 5 V,
  V_(+VBD) = 3 V) at 1 MSPS
• Power-Down Current (1 μA)
• 30-Pin and 38-Pin TSSOP Package