DLP3030-Q1 - DLP® Automotive 0.3" Digital Micromirror Device (DMD)

The DLP3030-Q1 Automotive DMD is primarily targeted for automotive head-up display (HUD)applications with very large field of view or augmented reality capability requiring long focaldistances. This chipset can be coupled with LEDs or lasers to create deep saturated colors withover 125% NTSC color gamut with support for 24-bit RGB video input. In addition, the chipsetenables high brightness (15,000-cd/m² typical) HUD systems with widedynamic range, and fast switching speeds that do not vary with temperature. As used in the TIreference design, very high dynamic range over 5000:1 can be achieved to meet the operating rangeof an automotive HUD system for bright daylight and dark night time driving conditions.

• Automotive Qualified
• 0.3-Inch Diagonal Micromirror Array
  • 7.6-µm Micromirror Pitch
  • ±12° Micromirror Tilt Angle (Relative to Flat State)
  • Side Illumination for Optimized Efficiency
• WVGA (864 × 480) Resolution
• Polarization Independent Spatial Light Modulator
  • Compatible With LED or Laser Light Sources
  • Image Viewable With Polarized Glasses
• Low-Power Consumption: 105-mW (Typical)
• Operating Temperature Range: –40°C to 105°C
• Hermetic Package With 2.5°C/W Thermal Efficiency
• JTAG Boundary Scan to Allow In-System Validation
• Compatible With the DLPC120-Q1 Automotive DMD Controller
• 78-MHz DDR DMD Interface

All trademarks are the property of their respective owners.