CD74HC4538-Q1 - Automotive Catalog High Speed CMOS Logic Dual Retriggerable Precision Monostable Multivibrators

The CD74HC4538 is a dual retriggerable/resettable precision monostable multivibrator for fixed-voltage timing applications. An external resistor (R_X) and external capacitor (C_X) control the timing and accuracy for the circuit. Adjustment of R_X and C_X provides a wide range of output pulse widths from the Q and Q\ terminals. The propagation delay from trigger input-to-output transition and the propagation delay from reset input-to-output transition are independent of R_X and C_X.

Leading-edge triggering (A) and trailing-edge triggering (B) inputs are provided for triggering from either edge of the input pulse. An unused A input should be tied to GND and an unused B input should be tied to V_CC. On power up, the IC is reset. Unused resets and sections must be terminated. In normal operation, the circuit retriggers on the application of each new trigger pulse. To operate in the nontriggerable mode, Q is connected to B\ when leading-edge triggering (A) is used, or Q is connected to A when trailing-edge triggering (B) is used. The period τ can be calculated from τ = (0.7) R_X, C_X; R_MIN is 5 kΩ. C_MIN is 0 pF.

• Qualified for Automotive Applications
• Retriggerable/Resettable Capability
• Trigger and Reset Propagation Delays Independent of R_X, C_X
• Triggering From the Leading or Trailing Edge
• Q and Q Buffered Outputs Available
• Separate Resets
• Wide Range of Output Pulse Widths
• Schmitt-Trigger Input on A and B Inputs
• Retrigger Time Is Independent of C_X
• Fanout (Over Temperature Range)
  • Standard Outputs . . . 10 LSTTL Loads
  • Bus Driver Outputs . . . 15 LSTTL Loads
• Balanced Propagation Delay and Transition Times
• Significant Power Reduction Compared to LSTTL Logic ICs
• V_CC Voltage = 2 V to 6 V
• High Noise Immunity N_IL or N_IH = 30% of V_CC, V_CC = 5 V