SN74HCT574 - Octal Edge-Triggered D-Type Flip-Flops With 3-State Outputs

These octal edge-triggered D-type flip-flops feature 3-state outputs designed specifically for bus driving. The ’HCT574 devices are particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers.

The eight flip-flops enter data on the low-to-high transition of the clock (CLK) input.

A buffered output-enable (OE)\ input can be used to place the eight outputs in either a normal logic state (high or low logic levels) or the high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance state and increased drive provide the capability to drive bus lines without interface or pullup components.

OE\ does not affect the internal operations of the flip-flops. Old data can be retained or new data can be entered while the outputs are in the high-impedance state.

Products containing the "SN74HCT574" keyword are: SN74HCT574APWR , SN74HCT574DBR , SN74HCT574DBR , SN74HCT574DBRE4 , SN74HCT574DBRE4 , SN74HCT574DBRG4 , SN74HCT574DW , SN74HCT574DW , SN74HCT574DWG4 , SN74HCT574DWG4 , SN74HCT574DWR , SN74HCT574DWR , SN74HCT574DWRE4 , SN74HCT574DWRE4 , SN74HCT574DWRG4 , SN74HCT574DWRG4 , SN74HCT574N , SN74HCT574N , SN74HCT574NE4 , SN74HCT574NG4

• Operating Voltage Range of 4.5 V to 5.5 V
• High-Current 3-State Noninverting Outputs Drive Bus Lines Directly or Up To 15 LSTTL Loads
• Low Power Consumption, 80-µA Max I_CC
• Typical t_pd = 22 ns
• ±6-mA Output Drive at 5 V
• Low Input Current of 1 µA Max
• Inputs Are TTL-Voltage Compatible
• Bus-Structured Pinout