SN74LVCZ16244A - 16-Bit Buffer/Driver With 3-State Outputs

This 16-bit buffer/driver is designed for 2.7-V to 3.6-V V_CC operation.

The SN74LVCZ16244A is designed specifically to improve the performance and density of 3-state memory address drivers, clock drivers, and bus-oriented receivers and transmitters.

The device can be used as four 4-bit buffers, two 8-bit buffers, or one 16-bit buffer. It provides true outputs.

Inputs can be driven from either 3.3-V or 5-V devices. This feature allows the use of these devices as translators in a mixed 3.3-V/5-V system environment.

During power up or power down when V_CC is between 0 and 1.5 V, the device is in the high-impedance state. However, to ensure the high-impedance state above 1.5 V, OE\ should be tied to V_CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

This device is fully specified for hot-insertion applications using I_off and power-up 3-state. The I_off circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down (V_CC = 0 V). The power-up 3-state circuitry places the outputs in the high-impedance state during power up and power down, which prevents driver conflict.

Products containing the "SN74LVCZ16244A" keyword are: SN74LVCZ16244ADGGR , SN74LVCZ16244ADGGR , SN74LVCZ16244ADGVR , SN74LVCZ16244ADGVR , SN74LVCZ16244ADL , SN74LVCZ16244ADLR , SN74LVCZ16244ADLR

• Member of the Texas Instruments Widebus™ Family
• Operates From 2.7 V to 3.6 V
• Inputs Accept Voltages to 5.5 V
• Max t_pd of 4.1 ns at 3.3 V
• I_off and Power-Up 3-State Support Hot Insertion
• Supports Mixed-Mode Signal Operation on All Ports (5-V Input/Output Voltage With 3.3-V V_CC)
• Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
• ESD Protection Exceeds JESD 22
  • 2000-V Human-Body Model (A114-A)
  • 1000-V Charged-Device Model (C101)

Widebus is a trademark of Texas Instruments.