SN74AUCH16244 - 16-Bit Buffer/Driver with 3-State Outputs

This 16-bit buffer/driver is operational at 0.8-V to 2.7-V V_CC, but is designed specifically for 1.65-V to 1.95-V V_CC operation.

The SN74AUCH16244 is designed specifically to improve the performance and density of 3-state memory address drivers, clock drivers, and bus-oriented receivers and transmitters.

The device can be used as four 4-bit buffers, two 8-bit buffers, or one 16-bit buffer. It provides true outputs and symmetrical active-low output-enable (OE)\ inputs.

To ensure the high-impedance state during power up or power down, OE\ should be tied to V_CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

Active bus-hold circuitry holds unused or undriven inputs at a valid logic state. Use of pullup or pulldown resistors with the bus-hold circuitry is not recommended.

This device is fully specified for partial-power-down applications using I_off. The I_off circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.

Products containing the "SN74AUCH16244" keyword are: SN74AUCH16244DGGR , SN74AUCH16244DGGR , SN74AUCH16244DGGRE4 , SN74AUCH16244DGGRG4 , SN74AUCH16244DGVR , SN74AUCH16244DGVRG4 , SN74AUCH16244GQLR , SN74AUCH16244ZQLR , SN74AUCH16244ZQLR

• Member of the Texas Instruments Widebus™ Family
• Optimized for 1.8-V Operation and is 3.6-V I/O Tolerant to Support Mixed-Mode Signal Operation
• I_off Supports Partial-Power-Down Mode Operation
• Sub 1-V Operable
• Max t_pd of 1.8 ns at 1.8 V
• Low Power Consumption, 20-uA Max I_CC
• ±8-mA Output Drive at 1.8 V
• Bus Hold on Data Inputs Eliminates the Need for External Pullup/Pulldown Resistors
• Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
• ESD Protection Exceeds JESD 22
  • 2000-V Human-Body Model (A114-A)
  • 200-V Machine Model (A115-A)
  • 1000-V Charged-Device Model (C101)

Widebus is a trademark of Texas Instruments.