TLV2772-Q1 - Automotive 2.7-V High-Slew-Rate Rail-to-Rail Output Operational Amplifier With Shutdown

The TLV277x CMOS operational amplifier family combines high slew rate and bandwidth, rail-to-rail output swing, high output drive, and excellent dc-precision. The device provides 10.5 V/µs of slew rate and 5.1 MHz of bandwidth while only consuming 1 mA of supply current per channel. This ac-performance is much higher than current competitive CMOS amplifiers. The rail-to-rail output swing and high output drive make these devices a good choice for driving the analog input or reference of analog-to-digital converters. These devices also have low distortion while driving a 600- load for use in telecom systems.

These amplifiers have a 360-µV input offset voltage, a 17 nV/Hz input noise voltage, and a 2-pA input bias current for measurement, medical, and industrial applications. The TLV277x family is also specified across an extended temperature range (–40°C to 125°C), making it useful for automotive systems.

These devices operate from a 2.5-V to 5.5-V single supply voltage and are characterized at 2.7 V and 5 V. The single-supply operation and low power consumption make these devices a good solution for portable applications. The following table lists the packages available.

• Qualified for Automotive Applications
• High Slew Rate . . . 10.5 V/µs Typ
• High-Gain Bandwidth . . . 5.1 MHz Typ
• Supply Voltage Range 2.5 V to 5.5 V
• Rail-to-Rail Output
• 360-µV Input Offset Voltage
• Low Distortion Driving 600- . . .0.005% THD+N
• 1-mA Supply Current (Per Channel)
• 17-nV/ Hz Input Noise Voltage
• 2-pA Input Bias Current
• Characterized From T_A = –40°C to 125°C
• Available in MSOP and SOT-23 Packages
• Micropower Shutdown Mode . . . I_DD < 1 µA