The OPAx316-Q1 family of single and dual operational amplifiers represents a new generation of general-purpose, low-power operational amplifiers. Featuring rail-to-rail input and output swings, low quiescent current (400 µA/ch typical) combined with a wide bandwidth of 10 MHz and very-low noise (11 nV/√Hz at 1 kHz) makes this family suitable for circuits requiring a good speed and power ratio. The low input bias current supports those operational amplifiers for applications with megaohm source impedances. The low input bias current of the OPAx316-Q1 yields a very-low current noise to make the device attractive for high impedance sensor interfaces.
The robust design of the OPAx316-Q1 provides ease-of-use to the circuit designer: a unity-gain stable, integrated RFI and EMI rejection filter, no phase reversal in overdrive condition, and high electrostatic discharge (ESD) protection (4-kV HBM).
These devices are optimized for low-voltage operation as low as 1.8 V (±0.9 V) and up to 5.5 V (±2.75 V). This latest addition of low-voltage CMOS automotive grade operational amplifiers provide a family of wide bandwidth, low noise, and low power that meet the needs of a wide variety of applications.
| Status | ACTIVE |
| Approx. price | 1.06 | 1ku |
| Number of channels | 4 |
| Total Supply Voltage | 1.8 |
| Rail-to-rail | In^Out |
| GBW | 10 |
| Slew Rate | 6 |
| Package Group | TSSOP|14 |
| Vos (offset voltage @ 25 C) | 2.5 |
| Iq per channel | 0.4 |
| Vn at 1 kHz | 11 |
| Rating | Automotive |
| Operating temperature range | -40 to 125 |
| Package size: mm2:W x L (PKG) | [pf]14TSSOP[/pf]: 32 mm2: 6.4 x 5 (TSSOP|14) |
| Offset drift | 2 |
| Features | EMI Hardened |
| Input bias current | 15 |
| CMRR | 86 |
| Output current | 50 |
| Architecture | CMOS |
| Radiation, TID | |
| Radiation, SEL | |
| Input common mode headroom (to negative supply) | -0.2 |
| Input common mode headroom (to positive supply) | 0.2 |
| Output swing headroom (to negative supply) | 0.005 |
| Output swing headroom (to positive supply) | -0.005 |