ISO7641FM - 6kVpk Low Power Quad Channels, 150Mbps Digital Isolators

ISO7640FM and ISO7641FM provide galvanic isolation up to 6 KV_PK for 1 minute per UL and VDE. These devices are also certified up to 5-KV_RMS Reinforced isolation at a working voltage of 400 V_RMS per end equipment standards EN/UL/CSA 60950-1 and 61010-1. ISO7640F and ISO7641F are quad-channel isolators; ISO7640F has four forward and ISO7641F has three forward and one reverse-direction channels. Suffix F indicates that output defaults to Low-state in fail-safe conditions. M-Grade devices are high-speed isolators capable of 150-Mbps data rate with fast propagation delays.

Each isolation channel has a logic input and output buffer separated by a silicon dioxide (SiO₂) insulation barrier. Used in conjunction with isolated power supplies, these devices prevent noise currents on a data bus or other circuits from entering the local ground and interfering with or damaging sensitive circuitry. The devices have TTL input thresholds and can operate from 2.7-V, 3.3-V, and 5-V supplies. All inputs are 5-V tolerant when supplied from 3.3-V or 2.7-V supplies.

• Signaling Rate: 150 Mbps
• Low Power Consumption, Typical I_CC per Channel
  (3.3-V Supplies):
  • ISO7640FM: 2 mA at 25 Mbps
  • ISO7641FM: 2.4 mA at 25 Mbps
• Low Propagation Delay: 7-ns Typical
• Output Defaults to Low-State in Fail-
  Safe Mode
• Wide Temperature Range: –40°C to 125°C
• 50-KV/µs Transient Immunity, Typical
• Long Life With SiO₂ Isolation
  Barrier
• Operates From 2.7-V, 3.3-V, and 5-V Supply and
  Logic Levels
• Wide Body SOIC-16 Package
• Safety and Regulatory Approvals
  • 6000 V_PK / 4243 V_RMS for 1 Minute per UL
    1577
  • VDE 6000 V_PK Transient Overvoltage, 1414
    V_PK Working Voltage
    per DIN V VDE V 0884-10 (VDE V 0884-
    10):2006-12
  • CSA Component Acceptance Notice 5A, IEC
    60950-1, IEC 61010-1, and IEC 60601-1 End
    Equipment Standards
  • TUV 5 KV_RMS Reinforced Insulation per
    EN/UL/CSA 60950-1 and EN/UL/CSA 61010-1
  • CQC Reinforced Insulation per GB4943.1-
    2011