ISO1050 - Isolated 5-V CAN transceiver

The ISO1050 is a galvanically isolated CAN transceiver that meets the specifications ofthe ISO11898-2 standard. The device has the logic input and output buffers separated by a siliconoxide (SiO₂) insulation barrier that provides galvanic isolation of up to5000 V_RMS forISO1050DW and 2500 V_RMS for ISO1050DUB. Used inconjunction with isolated power supplies, the device prevents noise currents on a data bus or othercircuits from entering the local ground and interfering with or damaging sensitive circuitry.

As a CAN transceiver, the device provides differential transmit capability to the bus anddifferential receive capability to a CAN controller at signaling rates up to 1 megabit per second(Mbps). The device is designed for operation in especially harsh environments, and it featurescross-wire, overvoltage and loss of ground protection from –27 V to 40 V and overtemperatureshutdown, as well as –12-V to 12-V common-mode range.

The ISO1050 is characterized for operation over the ambient temperature range of –55°C to105°C.

• Meets the Requirements of ISO11898-2
• 5000-V_RMS Isolation (ISO1050DW)
• 2500-V_RMS Isolation (ISO1050DUB)
• Fail-Safe Outputs
• Low Loop Delay: 150 ns (Typical), 210 ns (Maximum)
• 50-kV/µs Typical Transient Immunity
• Bus-Fault Protection of –27 V to 40 V
• Driver (TXD) Dominant Time-out Function
• I/O Voltage Range Supports 3.3-V and 5-V Microprocessors
• VDE Approval per DIN V VDE V 0884-10 (VDE V 0884-10):2006-12 and DIN EN 61010-1
• UL 1577 Approved
• CSA Approved for IEC 60950-1, IEC 61010-1,
  IEC 60601-1 3rd Ed (Medical) and Component Acceptance Notice 5A
• TUV 5-KV_RMS Reinforced Insulation Approval for EN/UL/CSA 60950-1 (ISO1050DW-Only)
• CQC Reinforced Insulation per GB4843.1-2011 (ISO1050DW-Only)
• Typical 25-Year Life at Rated Working Voltage (see Application Report SLLA197 and Life Expectancy vs Working Voltage)

All trademarks are the property of their respective owners.