LM2901-Q1 - Automotive Catalog Quad Differential Comparator

The LM2901x-Q1 family of devices consists of four independent voltage comparators, designed to operate from a single power supply over a wide range of voltages. Operation from dual supplies is possible, provided the difference between the two supplies is
2 V to 36 V, and V_CC is at least 1.5 V more positive than the input common-mode voltage. Current drain is independent of the supply voltage. The outputs can be connected to other open-collector outputs to achieve wired-AND relationships. LM2901V-Q1 supports higher V_CC voltage and LM2901AV-Q1 supports higher V_CC and lower V_IO.

• Qualified for Automotive Applications
• AEC-Q100 Qualified With the Following Results:
  • Device Temperature Grade 1: –40°C to 125°C
    Ambient Operating Temperature Range
  • Device HBM ESD Classification Level H2
  • Device CDM ESD Classification Level C6
• Single Supply or Dual Supplies
• Low Supply-Current Drain Independent of Supply
  Voltage: 0.8 mA (Typical)
• Low Input Bias Current: 25 nA (Typical)
• Low Input Offset Current: 2 nA (Typical)
• Low Input Offset Voltage: 2 mV (Typical)
• Common-Mode Input Voltage Range Includes
  Ground
• Differential Input Voltage Range Equal to
  Maximum-Rated Supply Voltage: ±36 V
• Low Output Saturation Voltage
• Output Compatible With TTL, MOS, and CMOS
• For Single Version in 5-Pin SOT-23, See the
  TL331-Q1 (SLVS969)