SN74LVCZ245A - Octal Bus Transceiver With 3-State Outputs

This octal bus transceiver is designed for 2.7-V to 3.6-V V_CC operation.

The SN74LVCZ245A is designed for asynchronous communication between data buses. The device transmits data from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR) input. The output-enable (OE)\ input can be used to disable the device so the buses are effectively isolated.

Inputs can be driven from either 3.3-V or 5-V devices. This feature allows the use of this device as a translator in a mixed 3.3-V/5-V system environment.

When V_CC is between 0 and 1.5 V, the device is in the high-impedance state during power up or power down. However, to ensure the high-impedance state above 1.5 V, OE\ should be tied to V_CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

This device is fully specified for hot-insertion applications using I_off and power-up 3-state. The I_off circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down. The power-up 3-state circuitry places the outputs in the high-impedance state during power up and power down, which prevents driver conflict.

Products containing the "SN74LVCZ245A" keyword are: SN74LVCZ245ADBR , SN74LVCZ245ADBR , SN74LVCZ245ADBRG4 , SN74LVCZ245ADW , SN74LVCZ245ADW , SN74LVCZ245ADWE4 , SN74LVCZ245ADWR , SN74LVCZ245ADWR , SN74LVCZ245AN , SN74LVCZ245AN , SN74LVCZ245ANG4 , SN74LVCZ245ANS , SN74LVCZ245ANSR , SN74LVCZ245ANSR , SN74LVCZ245APW , SN74LVCZ245APWE4 , SN74LVCZ245APWG4 , SN74LVCZ245APWR , SN74LVCZ245APWR , SN74LVCZ245APWR TSSOP20

• Operate From 2.7 V to 3.6 V
• Inputs Accept Voltages to 5.5 V
• Max t_pd of 6.3 ns at 3.3 V
• Typical V_OLP (Output Ground Bounce)
     <0.8 V at V_CC = 3.3 V, T_A= 25°C
• Typical V_OHV (Output V_OH Undershoot)
     >2 V at V_CC = 3.3 V, T_A = 25°C
• I_off and Power-Up 3-State Support Hot Insertion
• Support Mixed-Mode Signal Operation on All Ports (5-V Input/Output Voltage With 3.3-V V_CC)
• Latch-Up Performance Exceeds 100mA Per JESC 78, Class II