SN74LVCR16245A - 16-BIT BUS TRANSCEIVER WITH 3-STATE OUTPUTS

This 16-bit (dual-octal) noninverting bus transceiver is designed for 1.65-V to 3.6-V V_CC operation.

The SN74LVCR16245A device is designed for asynchronous communication between data buses. All inputs and outputs have equivalent 26-Ω resistors that will slow the edges of the output and reduce switching noise caused by long capacitive etch runs or cables.

This device can be used as two 8-bit transceivers or one 16-bit transceiver. Active bus-hold circuitry holds unused or undriven data inputs at a valid logic state.

• Member of the Texas Instruments
  Widebus Family
• Operates From 1.65 V to 3.6 V
• Inputs Accept Voltages to 5.5 V
• Max t_pd of 4.8 ns at 3.3 V
• Typical V_OLP (Output Ground Bounce)
  <0.8 V at V_CC = 3.3 V, T_A = 25°D
• Typical V_OHV (Output V_OH Undershoot)
  >2 V at V_CC = 3.3 V, T_A = 25°C
• Supports Mixed-Mode Signal Operation on
  All Ports (5-V Input/Output Voltage With
  3.3-V V_CC)
• All Inputs and Outputs Have Equivalent 26-Ω
  Series Resistors, So No External Resistors
  Are Required
• I_off Supports Live Insertion,
  Partial-Power-Down Mode, and Back-Drive
  Protection
• Latch-Up Performance Exceeds 250 mA Per JESD 17
• ESD Protection Exceeds JESD 22
  • 2000-V Human-Body Model (A114-A)
  • 200-V Machine Model (A115-A)