SN74LS623 - Octal bus transceivers

These octal bus transceivers are designed for asynchronous two-way communication between data buses. The control function implementation allows for maximum flexibility in timing.

These devices allow data transmission from the A bus to the B bus or from the B bus to the A bus depending upon the logic levels at the enable inputs (G\BA and GAB).

The enable inputs can be used to disable the device so that the buses are effectively isolated.

The dual-enable configuration gives the 'LS620, 'LS621, and 'LS623 the capability to store data by simultaneous enabling of G\BA and GAB. Each output reinforces its input in this transceiver configuration. Thus, when both control inputs are enabled and all other data sources to the two sets of bus lines are at high impedance, both sets of bus lines (16 in all) will remain at their last states. The 8-bit codes appearing on the two sets of buses will be identical for the 'LS621 and 'LS623 devices or complementary for the 'LS620.

 

Products containing the "SN74LS623" keyword are: SN74LS623DW , SN74LS623DWE4 , SN74LS623DWG4 , SN74LS623DWG4 , SN74LS623DWR , SN74LS623DWRG4 , SN74LS623N , SN74LS623N , SN74LS623N. , SN74LS623NDS , SN74LS623NE4 , SN74LS623NE4 , SN74LS623NG4 , SN74LS623NS , SN74LS623NSR , SN74LS623NSR , SN74LS623NSRE4 , SN74LS623NSRG4 , SN74LS623NSRG4

• Bidirectional Bus Transceivers in High-Density 20-Pin Packages
• Local Bus-Latch Capability
• Hysteresis at Bus Inputs Improves Noise Margins
• Choice of True or Inverting Logic
• Choice of 3-State or Open-Collector Outputs