ADS1013-Q1 - Automotive 12-Bit 3.3kSPS 1-Ch Delta-Sigma ADC With Oscillator, Voltage Reference, and I2C

The ADS1013-Q1, ADS1014-Q1,and ADS1015-Q1 devices (ADS101x-Q1) are precision,low-power, 12-bit, I²C-compatible, analog-to-digital converters (ADCs)offered in a VSSOP-10package. The ADS101x-Q1 devices incorporate a low-drift voltage reference and anoscillator. The ADS1014-Q1 and ADS1015-Q1 also incorporate a programmable gain amplifier (PGA) and a digitalcomparator. These features, along with a wide operating supply range, make theADS101x-Q1 well suited for power- and space-constrained, sensor measurementapplications.

The ADS101x-Q1 perform conversions at data rates up to 3300 samples persecond (SPS). The PGA offers input ranges from ±256 mV to ±6.144 V, allowing precise large- andsmall-signal measurements. The ADS1015-Q1 features an inputmultiplexer (MUX) that allows two differential or four single-ended input measurements. Use thedigital comparator in the ADS1014-Q1 and ADS1015-Q1 for under- and overvoltage detection.

The ADS101x-Q1 operate in either continuous-conversion mode orsingle-shot mode. The devices are automatically powered down after one conversion in single-shotmode; therefore, power consumption is significantly reduced during idle periods.

• Qualified for Automotive Applications
• AEC-Q100 Qualified With the Following Results:
  • Temperature Grade 1: –40°C to +125°C
  • HBM ESD Classification 2
  • CDM ESD Classification C4B
• 12-Bit Noise-Free Resolution
• Wide Supply Range: 2.0 V to 5.5 V
• Low Current Consumption: 150 µA
  (Continuous-Conversion Mode)
• Programmable Data Rate:
  128 SPS to 3.3 kSPS
• Single-Cycle Settling
• Internal Low-Drift Voltage Reference
• Internal Oscillator
• I²C Interface: Four Pin-Selectable Addresses
• Four Single-Ended or Two Differential Inputs (ADS1015-Q1)
• Programmable Comparator (ADS1014-Q1 and ADS1015-Q1)

All trademarks are the property of their respective owners.