OPA2673 - Dual, Wideband, High Output Current Operational Amplifier with Active Off-line Control

The OPA2673 provides the high output current and low distortion required in emerging Power Line Modem driver applications. Operating on a single +12V supply, the OPA2673 consumes a low 16mA/ch quiescent current to deliver a very high 700mA output current. This output current supports even the most demanding Power Line Modem requirements with greater than 460mA minimum output current (+25°C minimum value) with low harmonic distortion.

Power control features are included to allow system power consumption to be minimized. Two logic control lines allow four quiescent power settings: full power, 75% bias power in applications that are less demanding, 50% bias power cutback for short loops, and offline with active offline control to present a high impedance even with large signals present at the output pin.

Specified on ±6V supplies (to support +12V operation), the OPA2673 also supports up to +13V single or ±6.5V dual supplies. Video applications benefit from a very high output current to drive up to 10 parallel video loads (15) with < 0.1%/0.1° dG/d nonlinearity.

Products containing the "OPA2673" keyword are: OPA2673IRGVR , OPA2673IRGVR , OPA2673IRGVRG4 , OPA2673IRGVT , OPA2673IRGVT , OPA2673IRGVTG4 , OPA2673IRGVTG4

• WIDEBAND +12V OPERATION:
  340MHz (G = +4V/V)
• UNITY-GAIN STABLE: 600MHz (G = +1)
• HIGH OUTPUT CURRENT: 700mA
• OUTPUT VOLTAGE SWING: 9.8V_PP
• HIGH SLEW RATE: 3000V/µs
• LOW SUPPLY CURRENT: 16mA/ch
• OVERTEMPERATURE PROTECTION CIRCUIT
• FLEXIBLE POWER CONTROL
• OUTPUT CURRENT LIMIT (±800mA)
• ACTIVE OFF-LINE FOR TDMA
• APPLICATIONS
  • POWER LINE MODEMS
  • MATCHED I/Q CHANNEL AMPLIFIERS
  • BROADBAND VIDEO LINE DRIVERS
  • ARB LINE DRIVERS
  • HIGH CAP LOAD DRIVERS

All other trademarks are the property of their respective owners