The TPA31xxD2 series are stereo efficient, digital amplifier power stage for drivingspeakers up to 100 W / 2 Ω in mono. The high efficiency of the TPA3130D2 allows it to do 2 × 15 Wwithout external heat sink on a single layer PCB. The TPA3118D2 can even run 2 × 30 W / 8 Ω withoutheat sink on a dual layer PCB. If even higher power is needed the TPA3116D2 does 2 × 50 W / 4 Ωwith a small heat-sink attached to its top side PowerPAD. All three devices share the samefootprint enabling a single PCB to be used across different power levels.
The TPA31xxD2 advanced oscillator/PLL circuit employs a multiple switching frequencyoption to avoid AM interferences; this is achieved together with an option of either master orslave option, making it possible to synchronize multiple devices.
The TPA31xxD2 devices are fully protected against faults with short-circuit protectionand thermal protection as well as overvoltage, undervoltage, and DC protection. Faults are reportedback to the processor to prevent devices from being damaged during overload conditions.
Products containing the "TPA3116D2" keyword are: TPA3116D2 , TPA3116D2ADADR , TPA3116D2DAD , TPA3116D2DAD , TPA3116D2DADR , TPA3116D2DADR , TPA3116D2DADR. , TPA3116D2DAPR , TPA3116D2EVM , TPA3116D2EVM , TPA3116D2EVM-CB , TPA3116D2QDADRQ1 , TPA3116D2QDADRQ1All trademarks are the property of their respective owners.
Status | ACTIVE |
SubFamily | Speaker amps |
Audio input type | Analog Input |
Architecture | Class-D |
Speaker Channels | Stereo |
Power stage supply | 26 |
Output power | 50 |
Load | 4 |
SNR | 102 |
THD + N @ 1 kHz | 0.1 |
Iq | 20 |
Control interface | Hardware |
Closed/open loop | Closed |
Approx. price | 1.20 | 1ku |
Analog supply | 26 |
Power to parallel bridge tied load | 100 |
Sampling Rate | |
PSRR | 70 |
Operating temperature range | -40 to 85 |
Rating | Catalog |