TPA2010D1 - 2.5-W Mono Class-D Audio Amplifier with Variable Gain (TPA2010)

The TPA2010D1 (sometimes referred to as TPA2010) is a 2.5-W high efficiency filter-free class-D audio power amplifier (class-D amp) in a 1,45 mm × 1,45 mm die-size ball grid array (DSBGA) that requires only three external components.

Features like 88% efficiency, –75-dB PSRR, improved RF-rectification immunity, and 8 mm² total PCB area make the TPA2010D1 (TPA2010) class-D amp ideal for cellular handsets. A fast start-up time of 1 ms with minimal pop makes the TPA2010D1 (TPA2010) ideal for PDA applications.

In cellular handsets, the earpiece, speaker phone, and melody ringer can each be driven by the TPA2010D1. The TPA2010D1 allows independent gain while summing signals from separate sources and has a low 36 µV noise floor that is A-weighted.

• Maximum Battery Life and Minimum Heat
  • Efficiency with an 8-Ω Speaker:
    • 88% at 400 mW
    • 80% at 100 mW
  • 2.8-mA Quiescent Current
  • 0.5-µA Shutdown Current
• Only Three External Components
  • Optimized PWM Output Stage Eliminates LC
    Output Filter
  • Internally Generated 250-kHz Switching
    Frequency Eliminates Capacitor and Resistor
  • Improved PSRR (–75 dB) and Wide Supply
    Voltage (2.5 V to 5.5 V) Eliminates Need for a
    Voltage Regulator
  • Fully Differential Design Reduces RF
    Rectification and Eliminates Bypass Capacitor
  • Improved CMRR Eliminates Two Input
    Coupling Capacitors
• Die-size ball grid (DSBGA)
  • NanoFree™ Lead-Free (YZF)
  • NanoStar™ SnPb (YEF)