INA226-Q1 - AEC-Q100, 36V, Bi-Directional, High Accuracy, Low-/High-Side, I2C Out Current/Power Monitor w/Alert

The INA226-Q1 is a current shunt and power monitor with anI²C- orSMBUS-compatible interface. The device monitors both a shunt voltagedrop and bus supply voltage. Programmable calibration value, conversion times, and averaging,combined with an internal multiplier, enable direct readouts of current in amperes and power inwatts.

The INA226-Q1 senses current on common-mode bus voltages that can varyfrom 0 V to 36 V, independent of the supply voltage. The device operates from a single 2.7-V to5.5-V supply, drawing a typical of 330 μA of supply current. The device is specified over theoperating temperature range between –40°C and 125°C and features up to 16 programmable addresses onthe I²C-compatible interface.

• AEC-Q100 Qualified With the Following Results:
  • Device Temperature Grade 1: –40°C to 125°C
  • Device HBM ESD Classification 2
  • Device CDM ESD Classification C4B
• Senses Bus Voltages From 0 V to 36 V
• High-Side or Low-Side Sensing
• Reports Current, Voltage, and Power
• High Accuracy:
  • 0.1% Gain Error (Max)
  • 10 μV Offset (Max)
• Configurable Averaging Options
• 16 Programmable Addresses
• Operates from 2.7-V to 5.5-V Power Supply
• 10-Pin, DGS (VSSOP) Package