INA2180-Q1 - AEC-Q100, Dual Channel, 26V, Low-/High-Side, Voltage Output Current Sense Amp

The INA180-Q1, INA2180-Q1,and INA4180-Q1 (INAx180-Q1) currentsense amplifiers are designed for cost-optimized applications. These devices are part of a familyof current-sense amplifiers (also called current-shunt monitors) that sense voltage drops acrosscurrent-sense resistors at common-mode voltages from –0.2 V to +26 V, independent of the supplyvoltage. The INAx180-Q1 integrate a matched resistor gain network infour, fixed-gain device options: 20 V/V, 50 V/V, 100 V/V, or 200 V/V. This matched gain resistornetwork minimizes gain error and reduces the temperature drift.

All these devices operate from a single 2.7-V to 5.5-V power supply. The single-channelINA180-Q1 draws a maximum supply current of 260 µA; whereas, thedual-channel INA2180-Q1 draws a maximum supply current of 500 µA, andthe quad channel draws a maximum supply current of 900 µA.

The INA180-Q1 is available in a 5-pin, SOT-23 package withtwo different pin configurations. The INA2180-Q1 is available in an8-pin, VSSOP package. The INA4180-Q1 is available in a 14-pin, TSSOPpackage. All device options are specified over the extended operating temperature range of –40°C to+125°C.

• AEC-Q100 Qualified for Automotive Applications
  • Temperature Grade 1: –40°C ≤ T_A ≤ +125°C
  • HBM ESD Classification Level 2
  • CDM ESD Classification Level C6
• Common-Mode Range (V_CM): –0.2 V to +26 V
• High Bandwidth: 350 kHz (A1 Devices)
• Offset Voltage:
  • ±150 µV (Max) at V_CM = 0 V
  • ±500 µV (Max) at V_CM = 12 V
• Output Slew Rate: 2 V/µs
• Accuracy:
  • ±1% Gain Error (Max)
  • 1-µV/°C Offset Drift (Max)
• Gain Options:
  • 20 V/V (A1 Devices)
  • 50 V/V (A2 Devices)
  • 100 V/V (A3 Devices)
  • 200 V/V (A4 Devices)
• Quiescent Current: 260 µA Max (INA180)

All trademarks are the property of their respective owners.