CY74FCT2257T - Quadruple 1-of-2 Data Selectors/Multiplexers with 3-State Outputs and Series Damping Resistors

The CY74FCT2257T has four identical two-input multiplexers that select four bits of data from two sources under the control of a common data-select (S) input. The I₀ inputs are selected when S is low, and the I₁ inputs are selected when S is high. Data appears at the output in noninverted form for the CY74FCT2257T. On-chip termination resistors at the outputs reduce system noise caused by reflections. The CY74FCT2257T can replace the FCT257T to reduce noise in an existing design.

The CY74FCT2257T is a logic implementation of a four-pole, two-position switch, in which the position of the switch is determined by the logic levels supplied to S. Outputs are forced to the high-impedance off state when the output-enable (OE\) input is high.

All but one device must be in the high-impedance state to prevent currents from exceeding the maximum ratings if outputs are tied together. Design of the OE\ signals must ensure that there is no overlap when outputs of 3-state devices are tied together.

This device is fully specified for partial-power-down applications using I_off. The I_off circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.

• Function and Pinout Compatible With FCT and F Logic
• 25- Output Series Resistors to Reduce Transmission-Line Reflection Noise
• TTL Output Level Versions of Equivalent FCT Functions
• Edge-Rate Control Circuitry for Significantly Improved Noise Characteristics
• I_off Supports Partial-Power-Down Mode Operation
• Fully Compatible With TTL Input and Output Logic Levels
• ESD Protection Exceeds JESD 22
  • 2000-V Human-Body Model (A114-A)
  • 200-V Machine Model (A115-A)
  • 1000-V Charged-Device Model (C101)
• 12-mA Output Sink Current
  15-mA Output Source Current
• 3-State Outputs