The \x92FCT373T devices consist of eight latches with 3-state outputs for bus-organized applications. When the latch-enable (LE) input is high, the flip-flops appear transparent to the data. Data that meets the required setup times are latched when LE transitions from high to low. Data appears on the bus when the output-enable (OE\) input is low. When OE\ is high, the bus output is in the high-impedance state. In this mode, data can be entered into the latches.
These devices are fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.
Status | ACTIVE |
SubFamily | D-type latch |
Technology Family | FCT |
VCC | |
Bits | 8 |
Voltage | 5 |
F @ nom voltage | 70 |
ICC @ nom voltage | 0.5 |
tpd @ Nom Voltage | 4.2 |
3-state output | |
Rating | Military |
Operating temperature range | -55 to 125 |
Package Group | CDIP|20 |
Package size: mm2:W x L (PKG) | See datasheet (CDIP) |
Approx. price |