These octal buffers and line drivers are designed specifically to improve the performance and density of 3-state memory address drivers, clock drivers, and bus-oriented receivers and transmitters.
The ACT240 devices are organized as two 4-bit buffers/drivers with separate output-enable (OE)\ inputs. When (OE)\ is low, the device passes inverted data from the A inputs to the Y outputs. When (OE)\ is high, the outputs are in the high-impedance state.
To ensure the high-impedance state during power up or power down, (OE)\ should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
Status | ACTIVE |
SubFamily | Inverting buffer/driver |
Technology Family | ACT |
VCC | 5.5 |
Bits | 8 |
Voltage | 5 |
F @ nom voltage | 90 |
tpd @ Nom Voltage | 9.5 |
ICC @ nom voltage | 0.04 |
IOL | 24 |
IOH | -24 |
Rating | Military |
Operating temperature range | -55 to 125 |
Package Group | CDIP|20 |
Package size: mm2:W x L (PKG) | See datasheet (CDIP) |
Approx. price |