TLV313-Q1 - Low-Power, Rail-to-Rail In/Out, Op Amp

The TLV313-Q1 single-channeloperational amplifier combines low power consumption with good performance. This makesthe device designed for a widerange of applications, such as infotainment, engine controlunits, automotive lighting and more. The device features rail-to-rail input and output (RRIO) swings, low quiescentcurrent (65 µA, typical), wide bandwidth (1 MHz) and very low noise (26 nV/√Hz at 1 kHz), makingthe device attractive for a varietyof battery-powered applications that require a good balance between cost and performance. Further,low-input-bias current enables the device to be used in applications with megaohm sourceimpedances.

The robust design of the TLV313-Q1 device provides ease-of-use tothe circuit designer: unity-gain stability with capacitive loads of up to 100 pF, integratedRFI/EMI rejection filter, no phase reversal in overdrive conditions, and high electrostaticdischarge (ESD) protection (4-kV HBM).

The device isoptimized for operation at voltages as low as 1.8 V (±0.9 V) and up to 5.5 V (±2.75 V), and is specified over the extendedtemperature range of
–40°C to +125°C.

The single-channel TLV313-Q1 device is available in a SC70-5 package..

• Qualified for Automotive Applications
• AEC-Q100 Qualified With the Following Results
  • Device Temperature Grade 1: –40°C to +125°C Ambient Operating Temperature Range
  • Device HBM ESD Classification Level 3A
  • Device CDM ESD Classification Level C6
• Precision Amplifier for Cost-Sensitive Systems
• Low I_Q: 65 µA/ch
• Wide Supply Range: 1.8 V to 5.5 V
• Low Noise: 26 nV/√Hz at 1 kHz
• Gain Bandwidth: 1 MHz
• Rail-to-Rail Input/Output
• Low Input Bias Current: 1 pA
• Low Offset Voltage: 0.75 mV
• Unity-Gain Stable
• Internal RFI/EMI Filter
• Extended Temperature Range:
  –40°C to +125°C

All trademarks are the property of their respective owners.