The OPA170-Q1, OPA2170-Q1, and OPA4170-Q1 devices (OPAx170-Q1) are a family of 36-V,single-supply, low-noise operational amplifiers that feature micro packages with the ability tooperate on supplies ranging from 2.7 V (±1.35 V) to 36 V (±18 V). They offer good offset, drift,and bandwidth with low quiescent current.
Unlike most operational amplifiers, which are specified at only one supply voltage, theOPAx170-Q1 family of operational amplifiers is specified from 2.7 V to 36 V. Input signals beyondthe supply rails do not cause phase reversal. The OPAx170-Q1 family is stable with capacitive loadsup to 300 pF. The input can operate 100 mV below the negative rail and within 2 V of the positiverail for normal operation. Note that these devices can operate with full rail-to-rail input 100 mVbeyond the positive rail, but with reduced performance within 2 V of the positive rail. TheOPAx170-Q1 operational amplifiers are specified from –40°C to +125°C.
All trademarks are the property of their respective owners.
| Status | ACTIVE |
| Approx. price | 1.23 | 1ku |
| Number of channels | 4 |
| Total Supply Voltage | 2.7 |
| Rail-to-rail | In to V-^Out |
| GBW | 1.2 |
| Slew Rate | 0.4 |
| Package Group | TSSOP|14 |
| Vos (offset voltage @ 25 C) | 1.8 |
| Iq per channel | 0.1 |
| Vn at 1 kHz | 19 |
| Rating | Automotive |
| Operating temperature range | -40 to 125 |
| Package size: mm2:W x L (PKG) | [pf]14TSSOP[/pf]: 32 mm2: 6.4 x 5 (TSSOP|14) |
| Offset drift | 0.3 |
| Features | EMI Hardened |
| Input bias current | 15 |
| CMRR | 120 |
| Output current | 17 |
| Architecture | CMOS |
| Radiation, TID | |
| Radiation, SEL | |
| Input common mode headroom (to negative supply) | -0.1 |
| Input common mode headroom (to positive supply) | -2.0 |
| Output swing headroom (to negative supply) | 0.008 |
| Output swing headroom (to positive supply) | -0.15 |