LPC660 - Low Power CMOS Quad Operational Amplifier

The LPC660 CMOS Quad operational amplifier is ideal for operation from a single supply. It features a wide range of operating voltages from +5V to +15V and features rail-to-rail output swing in addition to an input common-mode range that includes ground. Performance limitations that have plagued CMOS amplifiers in the past are not a problem with this design. Input V_OS, drift, and broadband noise as well as voltage gain (into 100 kΩ and 5 kΩ) are all equal to or better than widely accepted bipolar equivalents, while the power supply requirement is typically less than 1 mW.

This chip is built with National's advanced Double-Poly Silicon-Gate CMOS process.

See the LPC662 datasheet for a Dual CMOS operational amplifier and LPC661 datasheet for a single CMOS operational amplifier with these same features.

Products containing the "LPC660" keyword are: LPC660 , LPC660AIM , LPC660AIM , LPC660AIM/IM , LPC660AIM/NOPB , LPC660AIM/NOPB , LPC660AIMX , LPC660AIMX , LPC660AIMX-NOPB , LPC660AIMX/NOPB , LPC660AIMX/NOPB , LPC660AIMXNOPB , LPC660AIN , LPC660AIN/IN , LPC660AIN/NOPB , LPC660AMD , LPC660AMDX , LPC660AMDX/NOPB , LPC660AMJ/883QS , LPC660IM

• Rail-to-rail output swing
• Micropower operation: (1 mW)
• Specified for 100 kΩ and 5 kΩ loads
• High voltage gain: 120 dB
• Low input offset voltage: 3 mV
• Low offset voltage drift: 1.3 μV/°C
• Ultra low input bias current: 2 fA
• Input common-mode includes V⁻
• Operation range from +5V to +15V
• Low distortion: 0.01% at 1 kHz
• Slew rate: 0.11 V/μs
• Full military temp. range available

All trademarks are the property of their respective owners.