The LMV712-N devices are high-performance BiCMOS operational amplifiers intended for applications requiring rail-to-rail inputs combined with speed and low noise. They offer a bandwidth of 5 MHz and a slew rate of 5 V/µs, and can handle capacitive loads of up to 200 pF without oscillation.
The LMV712-N is ensured to operate from 2.7 V to 5.5 V and offers two independent shutdown pins. This feature allows disabling of each device separately and reduces the supply current to less than 1 µA typical. The output voltage rapidly ramps up smoothly with no glitch as the amplifier comes out of the shutdown mode.
The LMV712-N with the shutdown feature is offered in space-saving 10-pin DSBGA and 10-pin WSON packages. It is also offered in 10-pin VSSOP package. These packages are designed to meet the demands of small size, low power, and low cost required by cellular phones and similar battery-operated portable electronics.
| Status | ACTIVE |
| Approx. price | 0.66 | 1ku |
| Number of channels | 2 |
| Total Supply Voltage | 2.7 |
| Rail-to-rail | In^Out |
| GBW | 5 |
| Slew Rate | 5 |
| Package Group | VSSOP|10 |
| Vos (offset voltage @ 25 C) | 3 |
| Iq per channel | 1.17 |
| Vn at 1 kHz | 20 |
| Rating | Automotive |
| Operating temperature range | -40 to 125 |
| Package size: mm2:W x L (PKG) | [pf]10VSSOP[/pf]: 15 mm2: 4.9 x 3 (VSSOP|10) |
| Offset drift | 5 |
| Features | Shutdown |
| Input bias current | 115 |
| CMRR | 80 |
| Output current | 35 |
| Architecture | CMOS |
| Radiation, TID | |
| Radiation, SEL | |
| Input common mode headroom (to negative supply) | -0.3 |
| Input common mode headroom (to positive supply) | 0.3 |
| Output swing headroom (to negative supply) | 0.01 |
| Output swing headroom (to positive supply) | -0.02 |