THS4520 - Rail-to-Rail Output Wideband Fully Differential Amplifier

The THS4520 is a wideband, fully differential operational amplifier designed for 5-V data acquisition systems. It has very low noise at 2 nV/ load. The slew rate is 570 V/µs, and with a settling time of 7 ns to 0.1% (2-V step), it is ideal for data acquisition applications. It is designed for unity gain stability.

To allow for dc coupling to ADCs, its unique output common-mode control circuit maintains the output common-mode voltage within 0.25 mV offset (typical) from the set voltage. The common-mode set point defaults to mid-supply by internal circuitry, which may be over-driven from an external source.

The input and output are optimized for best performance with their common-mode voltages set to mid-supply. Along with high performance at low power supply voltage, this makes for extremely high performance single supply 5-V and 3.3-V data acquisition systems.

The THS4520 is offered in a Quad 16-pin leadless QFN package (RGT), and is characterized for operation over the full industrial temperature range from –40°C to 85°C.

Products containing the "THS4520" keyword are: THS4520EVM , THS4520EVM , THS4520RGT , THS4520RGTR , THS4520RGTR , THS4520RGTRG4 , THS4520RGTRG4 , THS4520RGTRG4.. , THS4520RGTT , THS4520RGTT , THS4520RGTTG4 , THS4520RGTTG4 , THS4520TDA1 , THS4520TDA2

• Fully Differential Architecture With Rail-to-Rail Outputs
• Centered Input Common-mode Range
• Minimum Gain of 1 V/V (0 dB)
• Bandwidth: 620 MHz
• Slew Rate: 570 V/µs
• 0.1% Settling Time: 7 ns
• HD₂: –115 dBc at 100 kHz, V_OD = 8 V_PP
• HD₃: –123 dBc at 100 kHz, V_OD = 8 V_PP
• Input Voltage Noise: 2 nV/Hz (f >10 kHz)
• Output Common-Mode Control
• Power Supply:
  • Voltage: 3.3 V (±1.65 V) to 5 V (±2.5 V)
  • Current: 14.2 mA
• Power-Down Capability: 15 µA
• APPLICATIONS
  • 5-V and 3.3-V Data Acquisition Systems
  • High Linearity ADC Amplifier
  • Wireless Communication
  • Test and Measurement
  • Voice Processing Systems