The PGA870 is a wideband programmable-gain amplifier (PGA) for high-speed signal chain and data acquisition systems. The PGA870 has been optimized to provide high bandwidth, low distortion, and low noise, making it ideally suited as a 14-bit analog-to-digital converter (ADC) driver for wireless base station signal chain applications. The wide gain range of –11.5 dB to +20 dB can be adjusted in 0.5-dB gain steps through a 6-bit control word applied to the parallel interface. The gain control interface may be configured as a level-triggered latch or an edge-triggered latch, or it may be placed in an unlatched (transparent) mode. In addition to the 6-bit gain control, the PGA870 contains a power-down pin (PD) that can be used to put the device into a low-current, power-down mode. In this mode, the quiescent current drops to 2 mA, but the gain control circuitry remains active, allowing the gain of the PGA870 to be set before device power-up. The PGA870 is offered in a QFN-28 PowerPAD™ package.
Products containing the "PGA870" keyword are: PGA870 , PGA870EVM , PGA870EVM , PGA870IRHD , PGA870IRHDR , PGA870IRHDR , PGA870IRHDT , PGA870IRHDT , PGA870IRHDT.PowerPAD is a trademark of Texas Instruments.
All other trademarks are the property of their respective owners.
Status | ACTIVE |
Number of channels | 1 |
Total Supply Voltage | 5.25 |
BW @ Acl | 650 |
Acl, min spec gain | 0.27 |
Slew Rate | 2900 |
Vn at flatband | 3 |
Iq per channel | 143 |
Rail-to-rail | No |
Vos (offset voltage @ 25 C) | 3 |
Operating temperature range | -40 to 85 |
Package Group | VQFN|28 |
Approx. price | 4.35 | 1ku |
Output current | 50 |
2nd harmonic | 108 |
3rd harmonic | 95 |
Package size: mm2:W x L (PKG) | [pf]28VQFN[/pf]: 25 mm2: 5 x 5 (VQFN|28) |
GBW | 6500 |
Input bias current | |
Gain range | 31.5 |
@ MHz | 50 |
Gain | 20 |
Step Size | 0.5 |
CMRR | 76 |
Rating | Catalog |